FMOD Series, General Electronics Floor Mount Racks for
Out Door™ Electrical Enclosures
Application and Designed to meet IP54 with Fan & IP55 without Fan (Ingress protection) requirement. Racks manufactured out of Galvanized steel sheet punched, formed, welded and to withstand the Harsh out door condition the racks are specially powder coated Dual coat with primer & Pure polyester Powder
Racks are manufactured with highest quality standards under stringent ISO 9001-2008 Manufacturing & Quality management system. Manufacturing facility also comply ISO 14001-2004 & OHSAS 18001-2007
Standard for Racks will be fully welded frame with integrated side panel and Associated Front & Back Metal Door with 3 Point lock & Key and provision to mount racks on Floor and available from 6U to 32 U Variants with 600~ 800 Wide & 400~800 Depth configurations.
Fan mounting provision can be on Sides or Top with Canopy with Filter unit to meet IP 54 (Ingress protection) Requirements
Basic Frame | Steel folded |
---|---|
Construction | Welded |
Top & Bottom Cover | Welded to frame with cable entry exit cut outs |
Front Door/Rear Door | Lockable Metal Plain Door |
19” Mounting Angle | Formed Steel |
Std. Equipment Mounting | DIN Std. 10mm Sq. Slots |
Standard Finish | Powder coated |
Standard Colour | Grey & Off white |
Standard Mounting | Plinth |
Rack Standard | Conforms to DIN 41494 or equivalent standard |
Static Load | 750 Kg (Uniformly distributed in U Space) / 20Kg Per U |